-
Energy efficiency optimization of shuttle shelf system is the key to improve the overall performance of the storage system and reduce operating costs. Energy efficiency optimization not only helps to reduce energy consumption, but also improves the operating efficiency of the system and extends the service life of equipment. First of all, it is very important to choose an efficient shuttle bus. It can reduce power loss and improve power transmission efficiency. The motor of modern shuttle car can
Published on: December 16, 2024-11 Number of hits: 11
-
As an automated storage solution, the shuttle shelf system can significantly improve storage density and access efficiency. However, in order to ensure its long-term stable operation, system maintenance and troubleshooting are very important. The following are some key points for the maintenance and troubleshooting of the shuttle shelf: 1. The core parts of the shuttle shelf system are shuttle cars, shelves and control
Published on: December 16, 2024-11 Number of hits: 11
-
Building structure and material limitation From the perspective of building structure, the height of the tridimensional warehouse is mainly limited by the strength and stability of building materials. Generally, the height of traditional reinforced concrete three-dimensional warehouse can reach about 30-40 meters. This is because with the increase of height, the pressure and wind load borne by the structure will increase significantly. In this altitude range, through closing
Published on: December 13, 2024-12 Number of hits: 12
-
In terms of building structure and space utilization, from the perspective of space utilization, it is feasible to set up elevated warehouses inside the plant. There is usually a high space inside the factory building. Through reasonable planning, it is possible to build a multi-storey rack type elevated warehouse. This can make full use of the vertical space of the factory building and greatly increase the storage capacity of goods. For example, the height of the factory buildings of some large manufacturing enterprises can reach
Published on: December 13, 2024-11 Number of hits: 11
-
Running direction shuttle bus: the shuttle bus system is mainly composed of the main bus and the auxiliary bus. The primary trolley runs on the track, usually along the direction of the roadway (longitudinal), and can transport the secondary trolley to the roadway location. The secondary trolley itself can also carry out limited lateral movement on the platform provided by the primary trolley, which is mainly used for cargo access operation. Its overall running direction is relatively fixed, mainly in
Published on: December 13, 2024-14 Clicks: 14
-
The following aspects can be taken into consideration to ensure the safety of goods during the operation of the intelligent stereoscopic warehouse: First, the fire safety and fire monitoring system is equipped with advanced smoke detectors and temperature sensors, and the layout is carried out at each key location of the warehouse, including the shelf area, goods storage area, equipment room, etc. These detectors can sense signs of fire in real time, once smoke concentration or temperature is detected
Published on: December 11, 2024-15 Number of hits: 15
-
The maintenance of intelligent stereo library equipment is very important, which is directly related to the operation of stereo library and the security of cargo storage. Mechanical parts maintenance stacker and shuttle car are the key handling equipment of intelligent stereo warehouse. For the stacker, the inspection and maintenance of its track is one of them. Regularly check the flatness, straightness and wear of the track because of minor deformation or wear of the track
Published on: December 11, 2024-15 Number of hits: 15
-
The automated stereoscopic warehouse is not a single type of machinery, but a complex storage system, integrating a variety of mechanical equipment. The automated stereoscopic warehouse mainly includes the following key mechanical equipment. The first is the shelf, which is the basic storage structure of the whole system. These shelves are usually high-rise shelves, more than ten meters or even higher. They adopt cross beam or corbel structure, which can fully benefit
Published on: December 4, 2024-18
-
The automated stereoscopic library should have the following three important conditions: First, the automated stereoscopic library of the storage equipment system needs to have advanced shelves. This kind of shelf is usually a multi-layer, high-level three-dimensional structure, which can make full use of the vertical space of the warehouse. The design of the shelf should be firm to carry a large number of goods. For example, heavy shelves can store heavy raw materials, such as steel and machinery parts
Published on: December 2, 2024-18
-
The integration of storage and picking in the intelligent stereoscopic library has many important meanings. 1、 Improve operation efficiency The integration of storage and picking breaks the traditional mode of separating storage and picking, and reduces the number and time of handling goods between different areas. For example, in traditional warehouses, goods are stored in one area, and goods need to be transported to the picking area during picking, which consumes a lot of time and manpower. And intelligence
Published on: November 30, 2024-16
-
The intelligent stereoscopic warehouse uses the cooperation between the automated storage equipment and the computer management system to realize the high-level rationalization, access automation and simple operation of the stereoscopic warehouse. The use of intelligent stereoscopic warehouse has the following advantages: First, improve space utilization. The intelligent stereoscopic warehouse uses high-rise shelves to store goods, which can make full use of the vertical space of the warehouse, so that the storage capacity of the warehouse increases significantly. Compared with traditional
Published on: November 30, 2024-15
-
Strategies for balancing storage costs and performance requirements of intensive repositories: 1. Reasonably plan the storage system shelf selection. Select appropriate shelves according to the characteristics of goods and storage requirements. For example, for goods with high turnover rate and relatively single variety, the drive in shelf is a good choice. It has a high storage density and can effectively use space, although forklift trucks can access goods inside the rack
Published on: November 29, 2024-10
-
The storage capacity of a dense repository does not have a fixed value. It is affected by many factors. 1、 Storage device type Drive in rack Drive in rack is a common way of intensive storage. Its storage capacity depends on the size of shelves, the number of lanes and the size of cargo units. Generally speaking, the storage density of the drive in shelf is high. A standard drive in shelf warehouse,
Published on: November 28, 2024-16
-
WMS (Warehouse Management System) can well meet a variety of business scenarios, including inbound and outbound management, inventory counting, etc. 1、 In terms of inbound and outbound management, the warehousing management WMS system can record the warehousing information of goods in detail. The system can track the transportation status of goods from the supplier's shipment. When the goods arrive at the warehouse, the staff can scan the bars on the goods
Published on: November 27, 2024-10 Clicks: 9
-
In order to ensure the security and compliance of intelligent stereoscopic warehouse, comprehensive consideration and measures should be taken from many aspects. 1、 In terms of physical security, the shelf stability of intelligent three-dimensional warehouse is usually high and carries a large number of goods. The design and installation of the rack shall comply with relevant engineering standards, and high-quality steel shall be selected to ensure sufficient strength and stability. Check the shelves regularly,
Published on: November 27, 2024-17 Number of hits: 17
-
For multiple types of goods, the intelligent stereo library mainly realizes classified storage through the following ways. First, rely on advanced information management system. Before the goods enter the intelligent stereo warehouse, various information of the goods, such as size, weight, shape, category, etc., will be entered and coded in detail. The information management system formulates storage strategies based on these data, such as putting similar size and weight
Published on: November 25, 2024-15 Number of hits: 15
-
The processing capacity of automated stereoscopic library in peak hours is affected by a variety of factors, but in general, it shows high efficiency. From the perspective of equipment performance, the automated stereo library is equipped with an advanced automated storage and retrieval system (AS/RS). The stacker is the key equipment among them. In peak hours, high-performance stacker can quickly move in the rack roadway
Published on: November 25, 2024-15 Number of hits: 15
-
The combination of shuttle car and stacker plays an extremely important role in the field of modern warehousing and logistics. Its main functions are as follows: First, improve the utilization rate of warehousing space. The storage of shuttle car: shuttle car can quickly shuttle in the aisle of the shelf and store goods on each location of the shelf. It can adapt to shelves of different heights and depths, especially in the intensive storage shelf system
Published on: November 11, 2024-11 Number of hits: 41
-
AGV (Automated Guided Vehicle), as a highly automated logistics handling equipment, its software and hardware composition is relatively complex. Here's a detailed introduction: 1. Hardware composition Body: This is the basic structure of AGV, similar to the body of a car, which is used to carry other parts and provide storage for goods
Published on: November 11, 2024-11 Number of hits: 23
-
Shuttle and AGV (Automated Guided Vehicle) are automation equipment widely used in logistics, warehousing and other fields, but there are many differences between them: 1. Running track and navigation mode Shuttle: Shuttle usually runs on a fixed track, such as the track system laid between shelves
Published on: November 11, 2024-11 Number of hits: 27
369 in total 20 entries per page Page: 1/19
