-
In the planning of the new factory, whether to choose the traditional shelf+manual warehouse system or the fully automated stereoscopic warehouse system in the warehouse configuration, many times, on the surface, the stereoscopic warehouse with an investment of tens of millions only killed dozens of workers in the previous warehouse, or just released
Published on: March 7, 2018 Clicks: 179
-
How to improve the working efficiency of the stereo warehouse. 1. Optimize the storage location and improve the sorting efficiency. Classify the products in the warehouse, mark them separately, and arrange them in order. For example, use some simple words and symbols to represent the product name, category and other information. Scientific and accurate product coding can enable products to carry out various inbound and outbound operations more quickly
Published on: March 5, 2018 Number of hits: 151
-
1. The cross beam rack is simple in structure, safe and reliable, and can be adjusted and combined at will. The warehousing is not limited by the order of goods. It is widely used in the storage mode of pallet storage and forklift access. 2. The post piece of the cross beam rack is composed of the post, cross brace and diagonal brace connected by bolts. The rack frame is formed by splicing the column pieces and C-type welding beam, and is fixed with safety pins, which is simple and reliable in structure.
Published on: March 5, 2018 Clicks: 169
-
Establish several kinds of shelves commonly used in stereoscopic warehouse Gravity shelves Each cell of gravity shelves is an inventory slide with a certain slope. The cargo unit loaded into the chute of the man lift crane can automatically move from the inbound end to the outbound end under the action of its own weight until the outbound end of the chute or the existing cargo unit stops. Located at the outbound end of the slide
Published on: February 9, 2018 Number of hits: 1193
-
Automatic sorting system is one of the necessary facilities for advanced distribution centers. It has high sorting efficiency, usually 6000-12000 boxes of goods can be sorted per hour; It can be said that the automatic sorter is a key factor to improve the efficiency of logistics distribution. The automatic sorting system has the following characteristics: 1. It can be continuous and in large batch
Published on: February 2, 2018 Clicks: 194
-
The basic operation process of automated storage shelves is mainly divided into three steps:, Control system according to
Published on: January 18, 2018 Number of hits: 232
-
As a new concept in logistics warehousing, stereoscopic warehouse is widely used in many enterprises due to its advantages of improving the utilization rate of warehouses and convenient management. How can the stereoscopic warehouse improve the utilization rate of the warehouse? 1、 Pay attention to inventory taking, increase the efficiency of inventory taking, provide professional training and guidance to the staff involved in inventory taking, so that the inventory taking staff can fully understand the specific procedures and methods of inventory taking
Published on: January 15, 2018 Clicks: 191
-
The automated stereoscopic warehouse is an important part of the logistics industry. According to He Liming, president of the China Federation of Logistics and Purchasing and the China Institute of Logistics, China's economy is in a critical period of transition from high-speed growth to medium and high-speed growth. High logistics costs are still an important factor restricting the transformation and development of the national economy. China Logistics Equipment Network has learned that in order to
Published on: January 11, 2018 Number of hits: 260
-
As a common kind of shelf in modern warehouses, the storage capacity of the warehouse has been greatly improved. However, there are many points for attention in the design of the three-dimensional warehouse shelf. Only by understanding these points can the shelf play its due role. <1> Basic points of shelf design of stereo warehouse 1. The size of goods is in progress
Published on: January 9, 2018 Number of hits: 284
-
Warehouse establishment is a new concept emerging in logistics warehousing, and it is a form of higher technical level in the field of warehousing and logistics at present. The use of stereoscopic warehouse equipment can realize the rationalization of the high-level warehouse, the automation of access, and the simplicity of operation. The automated stereoscopic warehouse realizes the intensive storage of goods and improves the utilization rate of space. The operation space of roadway stacker for cargo storage and retrieval only needs the width of one cargo space
Published on: January 4, 2018 Number of hits: 417
-
With the development of technology, more and more automation has appeared in our lives, which has brought a lot of convenience to our life and work. Next, Mido intelligent technology will introduce you. Due to the continuous development of science and technology, the production and management of mechanical automation have replaced the past human labor
Published on: January 3, 2018 Number of hits: 163
-
With the rapid development of economy, enterprises have higher requirements for the storage of three-dimensional warehouse goods, which has greatly promoted the rapid development of the shelf market. The emergence of intensive storage shelves has brought a warm current to the shelf market. This kind of shelf not only discards the shortcomings of traditional shelves, but also can greatly improve the utilization rate and storage capacity of the warehouse. With the development of science and technology, the traditional shelves will be completely
Published on: December 29, 2017 Number of hits: 146
-
Talking about the development of automated warehouse automated warehouse is a new concept in logistics storage. The use of stereoscopic warehouse equipment can realize the rationalization of the high-level warehouse, the automation of access, and the simplicity of operation; The automated stereoscopic library is a form with high technical level at present. The main body of the automated stereoscopic warehouse consists of shelves, roadway stacking cranes, inbound (outbound) working platforms and automatic inbound (outbound)
Published on: December 26, 2017 Number of hits: 153
-
The stereoscopic warehouse is referred to as the stereoscopic warehouse for short. The capacity and storage efficiency of the stereoscopic warehouse directly affect the application value of the warehouse in real life. According to the different characteristics of the goods stored and the limitations of the storage environment, there are many kinds of classification of the stereoscopic warehouse. 1. Cabinet type automated vertical warehouse The cabinet type automated three-dimensional warehouse is a small removable warehouse
Published on: December 21, 2017 Number of hits: 592
-
Automated warehouse is the result of production and technology development after World War II. In the early 1950s, the overhead warehouse with bridge stacker crane appeared in the United States; At the end of the 1950s and the beginning of the 1960s, there was an elevated warehouse with a roadway stacker crane operated by a driver; In 1963, the United States took the lead in adopting computer control technology in elevated warehouses and established the first computer control
Published on: December 19, 2017 Clicks: 164
-
Detailed introduction to automated stereoscopic warehouse 1. The stereoscopic warehouse rack steel structure rack is the main equipment for storing goods in the high-rise rack storage area, which requires sufficient strength, rigidity and overall stability, and has high dimensional accuracy and meets the seismic requirements. The rack of this system adopts adjustable crossbeam combined rack, which is composed of shelf piece, cargo crossbeam and reinforced support bar, etc
Published on: December 18, 2017 Clicks: 410
-
Automatic stereoscopic library is the result of production and technological development after World War II. The development of elevated warehouse and its material handling equipment in China was not late. In 1963, the first bridge stacker crane was developed. In 1973, the first computerized automated elevated warehouse (15m high) was developed. The warehouse was put into operation in 1980. Elevated silo
Published on: December 14, 2017 Clicks: 140
-
1、 Overview of automated stereoscopic warehouse Automated stereoscopic warehouse is also referred to as high-rise shelf warehouse (elevated warehouse for short). Generally, it is because several, ten or even dozens of shelves are used to store unit goods. Because this kind of warehouse can make full use of space to store goods, it is often called "stereoscopic warehouse". Automated warehouse system (AS ／ RS － Automa
Published on: December 11, 2017 Number of hits: 3077
-
Shelves are equipment for storing goods in the warehouse. They originally have no technical content, and only need to be improved in structure and quality. But with the emergence of stereo storage, mechanized operation, access to intelligent systems, the requirements for stereo storage shelves are getting higher and higher. On the other hand, because of the high-tech shelves in the stereo warehouse, the stereo warehouse has more functions
Published on: December 5, 2017 Number of hits: 159
-
With the development of technology, more and more automation has appeared in our lives. Automated three-dimensional warehouse has brought many conveniences to our life and work. Here is an introduction. Due to the continuous development of science and technology, the production and management of mechanical automation have replaced the past human labor, and people's pursuit of efficiency has become increasingly high. Modern industrial production has emerged
Published on: December 4, 2017 Clicks: 310
431 in total 20 entries per page Page: 21/22
