Stereoscopic library As an important part of the modern storage system, shelves bear the responsibility of storing and managing a large number of goods. In order to ensure the safe and stable operation of the shelves, a series of daily maintenance work needs to be carried out.
First, regularly check the structural integrity of the shelves. Check whether the column, beam, connector and other parts of the shelf are deformed, bent, loose or damaged. If problems are found, they should be repaired or replaced in time to prevent dangerous accidents such as collapse of shelves during use. Professional inspection tools, such as caliper and level gauge, can be used to measure the size and perpendicularity of the shelves to ensure that they meet the design requirements.
Secondly, clean the shelf surface. As there may be dust, oil and other pollutants in the warehouse environment, long-term accumulation will affect the appearance and service life of the shelves. Therefore, it is necessary to regularly use clean rags or detergents to clean the shelf surface to remove dirt and impurities. During the cleaning process, pay attention to avoiding the use of highly corrosive cleaning agents to avoid damaging the coating on the shelf surface.
Moreover, check the carrying capacity of the shelf. As time goes by, the carrying capacity of shelves may decline due to the weight of goods, frequent access operations and other factors. Therefore, it is necessary to regularly test the load carrying capacity of the shelf. You can judge whether the load carrying capacity is normal by placing a certain weight of goods on the shelf and observing the deformation of the shelf. If the bearing capacity is found to decline, the storage layout of the goods should be adjusted in time or the shelves should be reinforced.
In addition, maintain the accessories and equipment of the shelf. The shelves of the stereo warehouse are usually equipped with some accessories and equipment, such as pallets, forklift rails, safety protection devices, etc. The normal operation of these accessories and equipment is also very important for the use of shelves. It is necessary to regularly check the damage of the tray and replace the damaged tray in time; Check the flatness and firmness of the forklift guide rail to ensure that the forklift can travel safely; Check whether the safety protection devices, such as guardrails and crash pads, are in good condition to prevent goods from falling or personnel from being injured.
Do a good job of rust prevention and corrosion prevention of shelves. In a humid or corrosive environment, shelves are prone to rust and corrosion. Therefore, it is necessary to take corresponding anti rust and anti-corrosion measures, such as brushing anti rust paint, using preservatives, etc. At the same time, the warehouse shall be well ventilated to avoid the formation of humid environment.
In a word, the daily maintenance of the shelves in the stereo warehouse is very important to ensure the safe and stable operation of the shelves. Regular inspection, cleaning, testing of bearing capacity, maintenance of accessories and equipment, and rust prevention and corrosion prevention work can extend the service life of shelves, improve the efficiency of the storage system, and provide a strong guarantee for the production and operation of enterprises.
