device Stereoscopic library Be sure to pay attention to these problems when shelving
The three-dimensional warehouse is also called the high shelf, Shuttle Rack The general warehouse should be at least 7 meters above the unit elevated warehouse, which is very suitable. Generally, several, ten or even dozens of layers of shelves are used to store unit goods. The correct device is the premise to ensure the safe use of the stereo warehouse, so what should be paid attention to when installing the stereo shelf
1. Foundation embedment
Foundation embedment should first meet the requirements of supervision and guidance in the process of installation. Once a problem is found, it needs to be corrected and solved in time. If the problem is ignored, it may lead to subsequent rework. Rework will not only reduce the quality, but also increase the efficiency and duration, adding costs. 2. Device benchmark
The device benchmark of the stereoscopic warehouse shelf is very important. It is necessary to confirm the benchmark during construction. At present, China does not attach great importance to this aspect, which will lead to some problems later. 3. Safety pin
The safety pin is a common problem that Z simply ignores. Many accidents are also caused by the safety pin. It is also necessary to check the height in front of and behind the crossbeam when installing the shelves in the stereo warehouse. Here, problems often appear simply. It is necessary to carefully check the height of the safety pin and crossbeam. The installation personnel should develop good habits to avoid making unnecessary mistakes.
4. Track connection
Track connection is an important issue in the device. Many tracks with poor connection will not only affect the use, but also have the potential of fracture in the future.
5. Grounding
It is also very important to ground the shelves of the stereo warehouse to avoid damage to the equipment caused by static electricity.
Device stereo library is the foundation of intelligent automated warehouse, and also the first step. If the bottom layer is firmly built, many unnecessary troubles will be reduced. If the bottom layer has problems, it will lead to the failure or unsafe phenomenon of the later automation equipment operation. After Z, it will return to work from the beginning, greatly reducing the work efficiency
